`
Home
Privacy
Site map
   
 
Transformers
Relay Testing
Busbar Fabrication Equip.
About
Contact Us
  t: +44 (0) 1355 236 057

General:

This compact measuring current transformer is designed to comply with BSEN/IEC60044-1 regulations and follow international trends in control gear/switchgear design and kilowatt-hour metering.

Clean and uniform in appearance and are entirely enclosed in impact and heat resisting housings. The moulded apertures allow transformers to be rapidly and firmly clamped or wedged to metric or inch busbars. Low cost busbar fixing devices are available, thereby eliminating the necessity for costly and complicated mounting angles. All terminal fitting are manufactured from plated brass and are grooved to ensure excellent contact pressure. Available in accuracy classes ranging from 0.2s to 5, and are fully tested using modern and highly accurate test equipment prior to despatch.

Model M4032
Primary Current Range Primary Accomodation

Unit Dimensions

(L x W x H) mm

Maximum VA at Accuracy Class
Class 3 Class 1 Class 0.5
75A

30mm dia hole

40 x 13mm Busbar

 

75 x 32 x 105 1.5 - -
80A 2.5 - -
100A 5 1.5 -
120A 5 2.5 -
150A 7.5 2.5 -
200A 10 5 2.5
250A 10 10 5
300A 15 10 5
400A 15 10 10
500A 15 15 10
600-800A 15 15 15
Available with 1A or 5A Secondary      

 

   
 
Transformers Relay Testing B/B Fab. Equip. About Terms Contact Us
 
 

Instrument Transformers Limited, 8 Lithgow Place, East Kilbride, Scotland UK. G74 1PW
t: +44(0)1355 236 057 f: +44(0)1355 239 259 e: websales@itl-uk.com
Registration No. SC54448
Copyright (c) 1973 - 2013 All rights reserved.